2012-02-01

Take Assessment - Final Exam for ch 1-10 - IT Essentials: PC Hardware and Software (Version 4.1)

1
A network administrator has finished migrating from a peer-to-peer network to a new client-server network configuration. What are two advantages of the new configuration? (Choose two.)

2
A home computer owner has a PC system that runs Windows XP. For security reasons the owner has been using a limited local user account for a number of years. The owner wishes to install a new piece of software, but the user account does not have the necessary permissions. Which type of account does the owner need to use to install the new software?

3
What must be done before a technician cleans a very dirty LCD screen on a laptop?

4
What characterizes spoofing?

5
A technician notices that a data floppy disk is in the floppy disk drive of a computer when it is powered on. Which error message could this potentially cause?

6
A computer technician needs to test the COM ports on some new computers. Which diagnostic tool can help achieve this task properly?

7
Which two quick solutions are commonly recommended when a technician is troubleshooting a laptop? (Choose two.)

8
Which two general precautions should be taken before replacing any non-hot-swappable laptop component? (Choose two.)

9
Which firewall port number or number combination must be open in order to remotely access a network device using SSH?

10
What is the purpose of Windows Vista 64-bit Kernel Patch Protection?

11
Why does the cable from the power supply to the motherboard have different colored wires?

12
A technician is asked to wire a network that supports CSMA/CD. Which architecture and physical topology should the technician use for supporting this access control method?

13
A technician has installed and configured an external projector on a laptop. What is the final task the technician must perform for the image to be displayed through the projector?

14
Which environmental factor helps ensure optimal performance for laptops?

15
What is the minimum CPU speed that is required to install Windows Vista according to the Microsoft recommendation?


16
Which protocol dynamically assigns IP addresses to network devices?


17
A directly-attached printer has always failed to work. Print jobs and the printer test page fail to print, but the printer self-test page prints OK. If the cabling is installed correctly, what is most likely the problem?

18



Refer to the exhibit. A Cisco Networking Academy instructor is trying to print a flash graphic from the curriculum. The print job has gone into the print queue as shown. Based on the output, what should be the next step in solving this problem?

19
Which Windows tool should be run before upgrading the operating system?

20
A home computer user is trying to customize the power management on a computer using Windows XP. However, the custom configuration is unsuccessful. What task must be completed to enable power management to be configured?

21
A customer who owns a business that creates high-quality color graphic images wants a new printer. The customer already has an ink-jet printer. Which type of printer would be a good recommendation?

22
Which two memory types are installed using Dual Inline Memory Module (DIMM) slots? (Choose two.)

23
What is a benefit of using the USB or FireWire ports to connect peripherals to a laptop?

24
Which type of cable standard uses a 9-pin connector and supports data rates in excess of 800 Mbps?

25
A user calls the help desk and complains that the PC locks up frequently. The technician verifies that the lockup happens randomly and cannot be reproduced on demand. When asked when it happens, the user replies that the lock up occurs anywhere between two and 30 minutes after the computer starts. Which hardware component is most suspect?

26
When calculating the total cost of ownership of a printer it is necessary to consider the cost of the consumables. Which two consumables are associated with an inkjet printer? (Choose two.)

27
A technician installed a network adapter in a computer and wants to test network connectivity. The ping command can only receive a response from local workstations. What could be causing the problem?

28
The company ABC reports that unauthorized communication from outside the network has caused serious problems in the finance department. Which software tool will help prevent this situation from occurring again in the future?

29
Which type of scanner generally has high costs but produces top-quality images?

30
What approach should a technician take when receiving a call from a stressed customer?




31
An employee is receiving e-mail from unknown banks asking for username and password information. Which type of security attack is the employee experiencing?

32
Which feature allows a technician to manage power settings through a Microsoft Windows control panel?

33
Which are three steps in the laser printing process? (Choose three.)

34
Which port is used only for input?

35
A customer needs to purchase a new power supply for a computer. What must be considered when selecting an appropriate power supply?

36



Refer to the exhibit. A technician is troubleshooting a problem where a teacher is unable to connect a laptop to a wireless network. The wireless NIC is enabled and the wireless network configuration settings are correct. Which key would be used in conjunction with the Fn key to enable the wireless connection?

37
Which two items are considered proper cleaning tools? (Choose two.)

38
A technician needs to purchase a new video adapter for a computer. Which factors should be considered when selecting the adapter?

39
A network technician receives an error that there is insufficient physical disk space on an external drive to hold a file from a Windows XP computer. What is a possible cause for the problem?

40
After Windows XP has been installed, which program would a technician use to select the programs that will run at startup?

41
Which two file systems are available for selection during installation of Windows XP? (Choose two.)

42
What deficiency is associated with RAID 0 compared with RAID 1?

43
What are the four layers in the TCP/IP reference model?

44
A newly purchased scanner is not functioning as efficiently as expected. Which step should a technician take to improve performance?

45
All default Windows XP tools and utilities are installed on a computer. The technician discovered that a few other Windows components are still needed. Which procedure can accomplish this task?

6 komentar:

bagast zha mengatakan...

A customer is experiencing repeated paper jams on a laser printer. Which quick solution might correct this problem?
*Power cycle the printer.

bagast zha mengatakan...

The driver for a network interface card has been updated on a Windows XP computer. All network access has been lost. Which steps in the Windows XP Classic View should be followed to roll back the network interface card driver?
*Choose Start > Settings > Control Panel. Double-click System. Click the Hardware tab. Choose Device Manager. Double-click the NIC adapter. Click the Driver tab. Click the Roll Back Driver button.

bagast zha mengatakan...

Which option is the most secure type of user *authentication?

bagast zha mengatakan...

A technician notices that an application is not responding to commands and that the computer seems to respond slowly when applications are opened. What is the best administrative tool to use correct this problem?
*Task Manager

Anonim mengatakan...

Are these real? i have the final next week

Anonim mengatakan...

bagast zha mengatakan...
A customer is experiencing repeated paper jams on a laser printer. Which quick solution might correct this problem?
*Power cycle the printer.

Nope.jpg
paper jams are "mechanical" issue, which means restarting the printer or installing new drivers wont change a thing, you should replace the paper if that's an option as quick solution, and check the paper pulling mechanism to see if its working as more advanced "solution"

Posting Komentar